The Ultimate Showdown: ESP Truss Divider Durability Test

At first glance, the ESP truss dividers may feel flimsy compared to other products on the market.  Made of flexible polycarbonate, they are purposely designed to be very thin and flexible to prevent overturning during use.

We put these truss dividers to the ultimate test to assess their overall durability and strength.
Do not try this at home (or work!).

Divide That Truss

Wonder how ESP’s lightweight, indestructible, stackable, poly-carbonate Truss Dividers work? Check this out.
Visit this page for more info http://wp.me/P7Y4FQ-7D

 

Introducing the ESP-KNX I Beam Clamp

ESP-KNX’s new line of low cost, low profile, high performance beam clamps are specifically engineered as permanent lift points for your performance venue.  1T thru 5T capacities are available over a wide range of beams. Installing in seconds, they provide absolute security for overhead loads. By close coupling loads into the shear web of the beam, they protect beam flanges from overload; unlike toe-clamp designs which carry all the loads thru the clamp bolts in tension (RISKY).  Pin termination allows a multitude of rigging options. Powder coat finishes and 17-4PH Stainless Steel for ultimate strength and corrosion resistance are available.

Please Contact Us for how to buy and more information.

The World’s Fastest TV Mount

The Facemount is geared for entertainment-style temporary installations. All versions of the mount are minimally rated for 100 lb. overhead load with a design safety factor of 5, but there are higher rated versions for heavier loads. The ESP TV mount uses the entire moment capacity of the truss and does not impose such a substantial local bending moment on the lower truss chord. Additionally, the over-tightening of U-bolts and crushing of the lower chord is a non issue with the design. The mount may be positioned anywhere along the usable length of truss barring obstructions such as vertical support connections, and allows for completely unobstructed use of the interior of the truss. The Facemount is available to fit all commercial box truss in multiple lengths and offsets. Custom sized units are available by special order. The special design of the ESP Facemount allows you to have it out of the box and on the truss in perfect alignment in under three minutes time.

To learn more about the Facemount, Click Here.

Proudly Made in the U.S.A.

The Maxx Truss Pick

 

dsc_1561-white-bgESP Maxx Truss Picks pack twice the load rating as competitor’s truss pick connectors into a lightweight and easy to use package. With an allowable 4400lb vertical saddle loading and a 4400lb “thru” connection, the MAXX Truss Pick can easily exceed the rating of even super-duty truss. Each body and clamps are carved from ultrasonically tested billet 7050-T7451. Toggles are aircraft quality tool steel spherical rod ends and clamp handles are heli-coiled for durability and long life. Each pick is anodized and laser engraved with rating, installation, and serialization data. They may be custom engraved with your company logo and bar codes for easy inventory control.

Learn more about ESP-KNX Maxx Truss Picks here.

Proudly Made in the U.S.A.

On the Set of Creed (2015)

Mega Mount 4
922
912
928
The ESP MegaMount was used to mount extra-large plasma-screen televisions on the set of the movie, Creed, which was released on November 19, 2015! The movie brought in $42.6 million opening weekend and $173.6 million overall, starring Michael B. Jordan, Sylvester Stallone and Tessa Thompson and was directed by Ryan Coolger.

Click Here to Learn More About the MegaMount

Proudly Made in the U.S.A.

ESP-KNX UD PermaPick

ud-truss-pick
ud-permapick-engraving
ud-permapick

Geared for permanent installation, ESP’s UD PermaPick is IBC 2012 and Code-Compliant in 50 States with an SF-5 Minimum Rating for Overhead Use.

Due to its inverted configuration, the UD PermaPick can be placed anywhere along the truss span that a GAC sling can; beautifully, quickly, and for less money!

The patented connection methods make this pick a snap to install with super low profile integral vertical and lateral (seismic) hard points.

Running out of balance due to offset loads?
No problem! Three integral pick points let you pick the optimum location for balance or allow a double hung arrangement for infinite adjustments.

Learn more about the ESP-KNX UD PermaPick here.

Proudly Made in the U.S.A.