Seismic Mount (Patent Pending)

 MSRP starting at $299.00

(ESP-GT-F33-SE-TV-100)

Where to Buy

FEATURES

-For permanent installation
-100# minimum vertical rating @ S.F.5
-Only laterally rated TV mount for seismic loading on space frame truss
-Single bolt connection
-No U-bolts
-Will not overstress the lower truss chord
-Stays in adjustment with truss movement
-Super fast installation
-Truss specific fitments
-All VESA patterns available
-200mmX200mm through 400mm X 800mm
-Cosmetically appealing finishes

STABILITY AND FLEXIBILITY

-The TV mount grabs the truss as soon as it is snapped over the truss chords and secured. The mount will not lose its adjustment due to truss sway, wind, or other factors as will underslung designs.

-The mount may be positioned anywhere along the usable length of truss barring obstructions such as vertical support connections, and allows for completely unobstructed use of the interior of the truss.

DYNAMIC AND SAFE

EXTENDED USE

Easy Mechanical Installation

Attach the application-appropriate wings to the mount, bolt the mount to the TV with the included bolts, snap the assembly to the truss and tighten the tension rod.

Easy Electrical/Cable Routing

The removable cover in the rear of the mount allows access to route the signal and power wiring hidden from view and when attached gives a beautiful finished look.

Easy Descrambler Box Mounting

Hiding the converter or tuning boxes for the TVs is easy with the designed-in space either on the face of the mount on the TV side or in the hidden space behind in the body itself with convenient wire tie slots provided.

Easy Labeling

The face of the mount provides an ample area for device labeling above the TV, is super clean and matches the rock and roll look of space frame truss perfectly when no label is present.

RATINGS

-All version of the mount are minimally rated for 100 lb overhead load with
a design safety factor of 5, but these mounts are very different from the competition in other ways.

-Underslung U-bolted designs can compromise the lower truss chord of a space frame truss with only minor side loading and are not suited for applications in which there is a seismic lateral loading requirement.

-The ESP TV mount uses the entire moment capacity of the truss and does not impose such a substantial local bending moment on the lower truss chord. Additionally, the over-tightening of U-bolts and crushing of the lower chord is a non issue with the design.

OPTIONS

Available to fit all commercial tri and box truss in multiple lengths and offsets.

Available Finishes:

Standard……………………………………………………………………….Unfinished Aluminum
Colors……………………………………………………….Any Powder Coat or Anodize Finish

HOW TO ORDER

TRUSS TYPE TRUSS FITMENT PART NUMBER
GLOBAL F33 ESP-GT-F33-TV
VERSA 10 ESP-VT-10-TV

 

Don’t see your fitment? Call us for special engineered custom applications!

(866) 725-6176